You buy a workspace's seats one by one, in any number, for a seat tier, Pro or Max, and a billing period, either monthly or yearly. The seats of one tier are shown together as a seat pack. There are no Plus seats: Plus is a personal plan only. A workspace holds one pack for each tier, always has at least 2 seats in total, and can buy up to 100; for more, contact sales. A change that would leave it with fewer than 2, such as lowering a pack's seats or canceling one, is refused, and Bluedeer says so. To stop paying for the workspace altogether, delete it. Only the owner can add, resize or cancel packs, and only the owner can assign, move or take away seats. Owners can remove members from the workspace, and admins can too while they hold a seat (see below).
Add seats on the web
On an Enterprise workspace, seats come with the agreement, so this isn't done here. See Enterprise seats below.
- Open the Workspace page and select Seats. Select Add seats at the top of the Seats panel. You can also select Manage seats under Plan & billing in the page's Settings.
- In the Add seats dialog, choose a tier, type the number of Seats or step it up and down, and choose Monthly or Yearly.
- Check the Total, then select Continue to payment. The checkout opens in Stripe.
A workspace has one pack for each tier, so a tier that already has a pack is not offered again. To add seats to a tier the workspace already has, change that pack's seats instead. On the pack's card, select Change size, set the new number of seats or the billing period, then select Change seats. More seats start at once, and you pay for the rest of the period straight away. Fewer seats, or a change from yearly to monthly, take effect at the next renewal, and the dialog says so.
A pack's seats can only go down to its unused seats. Seats that people hold, or that are held for an invitation, stay: the number stops there, and the dialog says why. To go lower, take seats away or revoke invitations first. Nobody loses a seat because the number went down.
Seats are bought and managed on the web only, at bluedeer.ai. The iPhone and Android apps don't sell seats: on the phone you can use the workspace, see its seats, give seats to people and request a seat, but not buy, change or cancel a seat pack.
While seat purchases are paused
Bluedeer can pause seat purchases for a while. Then the Seats page shows the notice "Seat purchases are paused for now. Please try again later." The seats the workspace already has keep working. Add seats is dimmed, and hovering over it shows the reason. Add seats, Renew and Change size show the same message in place of the seat picker, and Create a workspace sends nothing until purchases are back on.
Cancel a pack
On a pack's card, select Cancel pack. The pack keeps working until the end of the period you paid for, and the card shows when it ends. A pack that is already set not to renew shows Manage in billing instead, which opens the billing portal.
Three days before a pack that won't renew stops, the owner and every admin get one notice in the workspace's Inbox and one email, for example "5 Pro seats end on Wednesday, 18 November 2026": notices name the day, never a time, and the day is yours, where your apps last were. Seats Bluedeer gave the workspace are covered too. The people on the seats aren't told then; they hear from Bluedeer when the seats stop working. On the web the notice also says where renewal is turned back on and has Open billing; on the phone it says only what ends, when, and what happens after, without a button, because seats are bought on the web only.
When the workspace's ownership is transferred, the seat packs the previous owner paid for stop renewing at once and keep working until the end of the period already paid; the previous owner is never charged for them again. The new owner can keep those seats by adding a card on the web: on the Workspace page, under Seats, the Seat packs panel says which seats can be kept, until when, and at what price, with an Add a card button. The seats then continue on the new owner's card from that day, at today's price, with the same people on them and no gap; adding the card charges nothing. Once the card is added, the panel names the card and the day, and Stop undoes it. The phone can accept a transfer but can't add a card. Without a card, the seats stop working after that day unless the new owner buys seats. While the seats are set to continue on the new owner's card, their seat type can't be bought or changed again until that day. See Transfer workspace ownership.
Assign a seat
Members can also ask you for a seat. Their requests are listed under Seat requests on the Seats page. See Request a seat in a shared workspace.
- Open the Seats page. Each available seat shows Move someone here.
- Select Move someone here, then choose a member. Everyone active in the workspace is listed, with the seat they hold now, if any.
- Select Move here. The seat that person held before becomes available.
People without a seat are listed at the top of the Members page, under Waiting for a seat, apart from the members, and they aren't counted as members. Each row says since when they have been waiting and, when it is known, why (for example "The owner took their seat back" or "Joined with single sign-on"), and which seat they asked for, if they did. Select Give a seat beside them, choose a tier with an available seat, then select Give seat. While no seat is available, Give a seat is off and pointing at it says why, and Buy a seat opens Seats to add seats. An admin sees the same list, without Give a seat and Buy a seat. When nobody is waiting, the list isn't shown. A small mark on the Members tab tells the owner and admins that someone is waiting. On the phone, the owner opens the member's menu, taps Give a seat, and chooses a seat tier that has an available seat.
To give an available seat to someone who is not in the workspace yet, invite them to it from Members, under Invite people. See Invite people to a workspace.
Remove someone from the Members page
The Members page lists everyone in the workspace. For the owner and admins, people waiting for a seat are listed first, in their own list, with their own remove button. Removing someone is the only way, besides leaving, that a person stops being a member. Select the remove button beside a member, then select Remove to confirm. They leave the workspace, and their seat, if they hold one, becomes available. Their scheduled tasks there are paused, their pending actions are canceled, and the accounts they connected there are disconnected. Their private chats and artifacts stay private to them. What they shared with everyone in the workspace stays. The owner can remove members. An admin can too, but only while they hold a seat of their own. Only the owner can remove an admin, and nobody can remove the owner. On the phone, the removal warning gives the same list, in the same words. While directory sync is on, a person your sign-in system manages can't be removed here: the remove button beside them is off, and hovering over or focusing it shows why. Remove them in your sign-in system instead.
Move someone to another seat
On a seat that has a holder, select Move. Choose an available seat, which can be of another tier, then select Move. The person keeps access to the workspace. Their old seat becomes available. The seat's usage for the current billing period stays with the seat, not with the person. If there is no available seat, add seats first.
Take a seat away
On a seat that has a holder, select Take seat away. Turn on the switch that says the person can only read the workspace until they get a seat again, then select Take seat away.
- The person stays in the workspace, waiting for a seat, and has view-only access immediately. On the Members page they move to Waiting for a seat. They can still open what is shared with them there, as it is now, but not send messages, run tasks or make anything. See What you can do without a seat.
- Their scheduled tasks there are paused, and start again once they hold a seat.
- The seat stays paid and becomes available. It can be assigned again.
To take someone out of the workspace, remove them on the Members page. The owner's seat cannot be taken away: as the owner, you can move yourself to another seat, but never take your own seat away.
Enterprise seats
On an Enterprise workspace, seats are part of its agreement with Bluedeer. There is one kind of seat: Pro and Max seats are for Team workspaces only. Enterprise seats include no usage; what people use is billed each month. They are not sold as packs on the Seats page, and nobody can buy them there. To add seats, change how many there are, or end the agreement, the owner or an admin contacts sales.
Giving a seat to a person, moving them between seats and taking a seat away still work on the Seats page, as described above. Enterprise is billed by invoice, so the 3-day grace period below doesn't apply. Unpaid invoices work differently: see the Enterprise article.
In the last 30 days before the agreement's end date, and in the 14 days after it, the owner can buy Team seats (Pro or Max) here as described above, and the people on the agreement's seats move onto a free Team seat where one exists. See When an Enterprise agreement ends.
When a seat pack isn't paid
A pack you cancel keeps working until the end of the period you paid for. A pack stops being paid when that period ends, when it runs out unpaid, when Stripe puts it on hold, or when its payment fails. Then:
- For 3 days, the workspace is locked for the people on its seats: they can read everything, but not send messages, run tasks or make anything. There is no Free plan to fall back on in a shared workspace.
- The pack's card on the Seats page says when its seats end, for example "These 3 seats end on 3 Nov 2026. Renew them, or add seats of any tier, to keep their people." The seats are listed under Seats ending.
- You, the admins and the people on its seats are told in the workspace's Inbox, with a notification, when the 3 days start and again the day before they end. Everyone also gets an email, which is always sent and can't be turned off. When the pack's payment didn't go through, the email says so and how to pay.
If the pack is paid or renewed within those 3 days, nothing is lost: everyone keeps their seat and works as before.
If you buy a pack of any tier in that time, the people on the ending pack move onto its available seats, as many as it holds: you first, then open seat requests for that tier, then admins, then whoever joined the workspace first. Anyone who doesn't fit stays on the ending pack until its 3 days are over. You can still give them a seat yourself under Seats, and they keep that seat.
After 3 days, the pack's seats end. The people still on them lose their seat and stay in the workspace, waiting for a seat, with view-only access, unless they hold another seat there. Their scheduled tasks there stay paused until they get a seat again. Nobody is removed from the workspace as a result.
A refund ends the seats immediately, with no 3-day period: the people on them are waiting for a seat, with view-only access, straight away.
Renew a pack that ended
Packs are renewed on the web, on the Seats page.
- Payment failed or on hold: on the pack's card, select Pay in billing and update the payment.
- Canceled or ran out: on the pack's card, select Renew. The Renew dialog has the same tier, number of seats and billing period already chosen. Select Continue to payment. Once the new pack is paid, the people on the ending pack's seats move onto its seats, so everyone keeps working.