A task is work that Bluedeer runs for you on a schedule. You create one by asking the assistant in a chat (see How do I schedule a task?). In the app you manage it from the Tasks screen. The rules are the same as on the web, so How do I run, pause, edit or cancel a task? explains what each setting means. This article shows where things are on the phone and what the app says.
See your tasks
On Home, the TASKS section is always there: tap See all tasks at its top right to open the Tasks screen, whether a task is coming up, all your tasks are paused, or you have none yet. The section shows the task that runs next under UP NEXT; when none is coming up, it says so and how many of your tasks are paused. Members of a shared workspace have the same section. In a shared workspace, Manage workspace → General → Catch up → All tasks opens the same screen, and the owner and admins can also tap Scheduled tasks on their Home. It lists the tasks in the workspace you have selected, under Scheduled with the number of tasks. Each row shows the task's name, its status (active, paused, completed, failed or canceled), its schedule, its tool-call limit for a run and its next run. If you have no tasks yet, the screen says "No tasks yet." and suggests asking the assistant to schedule something. When there are more tasks than fit on the screen, tap Show more at the bottom of the list.
Tap a row to open the task. You can also open a task from its finished run on Home, or from a notice in the Inbox.
Open a task
A task has two tabs at the top:
- Overview shows what the task does, its next run, its settings and its latest run.
- Results & history shows what its runs made and a list of every run.
Pull down on either tab to refresh the task.
Under the buttons, Overview lists the task's settings. Next runs, right under Schedule, shows the next three times the task will run. For a task that starts when something happens, Schedule reads "When:" followed by what starts it, Only when shows its filter, and the next run reads "When it happens". Task details, near the bottom, is collapsed: tap it to see when the task was created and last updated, and whether it is private.
Run, pause, resume and edit
On Overview, the buttons sit under Next run. Which ones you see depends on the task's status:
- Run now starts a run straight away. A message says "A new run was queued for this task."
- Pause stops the task from running on its schedule. It shows while the task is active.
- Resume starts a paused task again on its saved schedule. It shows while the task is paused.
- Edit opens the Edit task screen. It shows for active, paused, completed and failed tasks.
A completed task still shows Run now and Edit. A canceled task shows no buttons. In a shared workspace, only the person who created a task sees these buttons. Anyone else sees the note "Only the person who created this can change it."
If a task needs permission to resume
Some tasks cannot run on their own until you allow certain actions. When you tap Resume and the task needs that, a card called This task needs permission opens. It lists the actions the task needs. Any step that cannot be allowed here is listed under These steps will be skipped and reported, and the task will skip it and say so in its run.
- Tap Allow all to allow the listed actions for this task. If nothing on the card can be allowed, the button reads Resume anyway.
- Tap Cancel to change nothing. The task stays paused.
When the card can allow something, it also has a switch called Also don't ask in chats. Turn it on to set your own rule for these actions to Don't ask, as in Settings, AI & Chat, Action confirmations. Leave it off and the task is allowed these actions only for itself. In chats you are still asked.
Edit a task
Tap Edit to open the Edit task screen. Tap Save at the top right to keep your changes, or Cancel to leave without saving. Save stays off until you change something.
The fields are the same as on the web. On the phone:
- Name and Instructions are text boxes.
- Schedule has four choices, Once, Cron, Interval and When something happens.
- Once has Runs on and Time zone. Tap Runs on to pick the day on a calendar and set the hour and minute with the − and + buttons (minutes move in steps of 5), then tap Done. The time is read in the task's time zone, which the row names, for example "Riyadh time".
- Cron has a Cron expression box and Time zone. If you are not sure what to type in the expression, ask the assistant in a chat to change the schedule for you.
- Interval has Every seconds and Starting from. An interval must be at least 300 seconds, which is 5 minutes. Starting from opens the same calendar, read in your phone's time zone.
- When something happens starts the task from an event instead of a clock. Under Starts when, choose what starts it. A choice the workspace can't use yet is grayed out with the reason, such as "Connect this app in this workspace first." Only when narrows which events start the task. Group events over (seconds, optional) joins events that arrive close together into one run. Left empty, the screen says "Each event starts its own run." When a web request to the task's own address starts the task, a Webhook address section appears under it, with the address, its checks and its last deliveries. See Start a task when something happens and Start a task from a webhook.
- Tap Time zone to choose from a list. Your phone's time zone is first, then the one the task uses now. Type a city or region in the search box, for example "New York", to find a zone. If you change the time zone, the time you picked stays the same on the clock: 9:00 stays 9:00 in the new zone.
- When to run shows on tasks whose runs fall at busy hours. Tap At the scheduled time, or one of the When usage is cheaper choices with the latest time a run may wait. The task's screen then says when the next run is planned. See How do I let a task run when usage is cheaper?.
- Completion notifications are Always, On change or Never.
- Notify on failure is a switch.
- Results also go to appears for tasks in a shared workspace. It has one switch for each teammate. See Results also go to below.
- Tool calls per run (optional) can be left empty. The task then uses the safety limit on tool calls in one run, which is the same on every plan, and the screen shows the limit that applies now. A number you enter can only be lower.
If a change lets the task do something it could not do before, the This task needs permission card appears before anything is saved. Tap Allow all to save with those permissions, or Save anyway if nothing on the card can be allowed. Tap Cancel to keep the old settings. If the change also shares results with teammates, the button reads Allow all and share or Share and save instead.
If a workspace rule sends changes to this task to an approver, Save doesn't save yet. An alert says "Waiting for" the approver and the rule, and "Nothing is saved until they do; you'll hear in your Inbox."
Results also go to
In a shared workspace, the Results also go to section on Overview lists the teammates who receive the task's results. Each one shows one of two states:
- Can open results: you have approved them.
- Not approved: gets nothing: until you approve, runs send them nothing.
Tap Approve sharing to approve them. Approval gives the teammate access to the task and to the artifacts its runs make, so you only need to do it once for each person. In the Edit task screen, the switch for each teammate does the same. You can send results to a limited number of people. A teammate who has left the workspace stays listed as A former member until you take them off, and gets nothing in the meantime.
Cancel a task
Canceling stops a task permanently. You can cancel a task that is active or paused. Its runs and results stay in its history afterwards.
- On Overview, tap the red Cancel task button at the bottom of the page.
- On the Tasks screen, tap the close icon on the right of an active or paused task's row.
Both ask the same question as the web, titled Cancel “task name”?: "The task stops running and can’t be resumed. Its results and history stay available." Tap Cancel task to confirm, or Keep task to keep it.
Allowed to run on its own
Allowed to run on its own lists the actions the task may take without asking, such as sending an email, with the day each one was allowed. To revoke one, tap Remove next to it, then Remove in the alert. From its next run the task skips that action and asks for permission in your Inbox instead. The section says "Nothing yet." when the task has no such actions.
Results & history
Results & history has two parts.
- Task outputs shows what completed runs made, under What changed and Artifacts. Tap an artifact to open it in the app, on its own page, with Share and Download. Tap Newer or Older to move between runs. Run details shows when a run was scheduled and, if it made any, its Structured outputs.
- Run history lists every run with its status: Queued, Running, Succeeded, Failed, Canceled, Limit reached, Waiting for approval (a step is still waiting for an answer: one a workspace rule sent to an approver, or one that would reach someone outside the organization and waits for you, the task's owner, in your Inbox), Declined by reviewer (the approver rejected a step, so nothing was done for it) or Approval expired (nobody approved a step within 24 hours, so nothing was done for it). A run shows Succeeded only when every step sent to an approver was approved and done; when several such steps ended differently, the run shows one status and lists each step. A run that an event started has a line under its date that begins "Started because of" and names the event, with "and 2 more events" when several were grouped into it. Tap a run to see its start and finish times, how many tool calls it used out of its limit, its time limit and its summary. A step the run was not allowed to take on its own shows as "Skipped:" with the reason, for example "Skipped: Send email. It asks before it runs." A step a workspace rule sent to an approver shows as "Waiting for" the approver, with Details, and once it's answered, who approved or declined it and how it went. If the approver gave a reason for declining, it's shown under the step, quoted as they wrote it. Tap Newer or Older to page through the runs.
What is in a task's results and run history? explains what each status and figure means.
If consecutive runs fail, the Overview tab shows how many have failed in a row. Why did my task stop after it failed? explains what that count means. The notices you get for failures and finished runs are explained in Notifications on the phone and Where do task results and notices appear?.
If something goes wrong
If the task cannot be loaded, the screen says "Couldn't load task" and offers Retry and Back. If an action fails, such as pausing or running the task, an alert gives the reason. Check your connection and try again. If you have no seat in the workspace you are in, the screen shows a banner in place of the buttons. See What does the app show when I have no seat in a workspace?