# How do I start a new chat?

Start a new chat with the New chat button in the sidebar, then type your message in the box at the bottom of the screen.

These steps are for the web app.

## Start a chat

1. Click **New chat** in the sidebar.
2. Type your message in the box that reads **Message Bluedeer...**.
3. Press **Enter** to send. To start a new line without sending, press **Shift+Enter**. You can also click **Send Message**.

A message has no length limit, and Bluedeer never cuts it short. If a message is too long for Bluedeer to read at once, the reply says so instead of answering. Shorten it, split it into several messages, or attach the long text as a file. In the chat, a very long message shows its first 5,000 characters with a **Show more** button, and each click shows 5,000 more. **Copy** always copies the whole message. A long text you paste becomes a **Pasted text** card instead; see [How do I add files, voice messages or @ mentions to a message?](https://support.bluedeer.ai/using-bluedeer/chats/add-files-voice-and-mentions.md)

While Bluedeer is answering, the send button changes to **Stop generation**. You can type your next message in the meantime: **Enter** doesn't send it until the answer ends, and your text stays in the box.

## Stop an answer, or leave while it is written

Bluedeer writes the answer independently of your browser. If you close the tab, reload the page or close the phone app, the answer continues, and you see it when you open the chat again, on any device.

To stop an answer, click **Stop generation**. While Bluedeer processes the request, the button shows **Stopping…** and can't be clicked. The answer shows as stopped once Bluedeer has stopped it, and what it wrote so far stays in the chat. If the request can't reach Bluedeer, for example because you are offline for a moment, you see **The reply could not be stopped. Check your connection and try again.** The answer continues, and you can click **Stop generation** again.

An answer can also end early on Bluedeer's side, for example when it reaches its time limit, or when an Incognito chat or a support session closes. It then shows as stopped, what it wrote stays in the chat, and the reason is shown under it, such as **This reply ran too long and was stopped.**

If you are away when a longer answer finishes, Bluedeer can tell you. See [How do I get notifications in my browser?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/browser-notifications.md)

Bluedeer gives a new chat a title based on your first message. You can change the title later. See [How do I rename, pin or delete a chat?](https://support.bluedeer.ai/using-bluedeer/chats/rename-pin-and-delete-chats.md)

## Links in a reply

When a reply gives a web address on its own, the chat shows the site's icon and the site's name, such as **example.com** for `https://news.example.com/2026/report?page=2`, so a long address never fills several lines. Mail links show the email address, and links the reply names with its own words keep those words. When those words are themselves a site's name, such as `example.com`, the link shows where it really leads instead, so a link to `https://example.com/pricing` never reads the same as a link to the home page, and words that name one site can never hide a link to another. An address the reply writes as code on its own, such as `example.com` or `https://example.com/page`, is shown as a link too; code blocks, commands and file names such as `readme.md` are left exactly as written.

When one reply gives several addresses on the same site, each link adds the end of its address so you can tell them apart: `https://github.com/expo/expo` and `https://github.com/facebook/react` show as **github.com › expo** and **github.com › react**. Links that differ only in what follows a `?` or a `#` show that part, such as **example.com › ?page=2**, and links on different subdomains show the subdomain, such as **docs.github.com**, with the subdomain in a lighter shade than the site's own name.

The link still leads to the full address. On the web, hover over a link to see the full address, and right-click it to copy it (for a link that asks before it opens, see below). In the phone app, tap a link to open it, or hold it to copy the full address (an address the reply wrote as code is copied exactly as written); the notice that confirms the copy names the address. Text that includes a link can still be copied in the phone app: on iPhone, hold the words of the paragraph to copy the whole paragraph; on Android, select the text as usual. The copied text contains each link's full address, or the link's own words for a link written with words.

Web addresses you type in your own messages stay as plain text; they are not turned into links.

### Links to your artifacts

When Bluedeer links one of your artifacts in a reply, for example an artifact it made, saved from your computer, moved or renamed, the link stays in the sentence with an icon for the kind of file, and its type and size follow it, such as **PDF · 72 KB**. An artifact linked by its address alone shows its name instead. After the paragraph that holds the link:

- a video appears as a player you can play in place or full screen;
- a sound file appears as the same player as a voice message;
- a picture appears as a picture, as it does when Bluedeer makes one.

A reply that links several of these shows each one, in the order of the links. Other artifacts keep their link, which opens the artifact's preview. A link in an older message opens the artifact as it was when that message was written. If you can't open a linked artifact, for example because it belongs to another workspace or was never shared with you, the link shows **Not available** and nothing else about the artifact. The same is true on the web and in the phone app.

## Leaving Bluedeer

When you click a link that opens another website, Bluedeer first opens **You're leaving Bluedeer** as a page of its own in a new tab. The page names the site the link really opens and shows its full address, with the site's own name in bold. It also tells you when something deserves a second look: the link's words name a different site from the one it opens, the address uses letters that look like other letters, the link is a shortened link whose destination isn't known until it opens, anyone can publish pages on the site, or the address isn't secure. Choose **Open link** to continue to the site in that same tab, or **Cancel** to close the tab and stay where you were. The site you open is not told which Bluedeer page you came from.

The notice appears for links in replies, in the sources listed while the assistant works, on cards from your connected apps and tools, in shared chats and in pages. It doesn't appear for:

- Bluedeer's own sites, the pages people make and share with Bluedeer, and the links that move around the app.
- Sites you added to your own trusted sites.
- Email and phone links, files you download, and sign-in or connect buttons.

Shortened links, such as bit.ly links, always ask, because where they lead isn't known until they open.

Bluedeer doesn't keep a list of trusted websites for you: even well-known sites ask until you add them yourself, because any site can change or be taken over.

A link that a page opens works the same way, and the notice shows its whole address at once, because a page can put what it shows you into an address.

On the phone, the same notice appears as a sheet over the app instead of a page.

### Opening a link in a new tab yourself

A link keeps its real address, so **Copy link address** in the right-click menu copies the site's address. If you open a link in a new tab yourself (with the middle mouse button, Ctrl-click or Cmd-click, or **Open link in new tab** from the right-click menu), the site opens directly, without the notice.

A **You're leaving Bluedeer** page that Bluedeer didn't open in your browser, such as one somebody sent you, shows the address so you can copy it, but has no **Open link** button.

### Trusted sites

To stop being asked about a site, turn on **Always open links to _site_ without asking** on the notice page before you choose **Open link**. This option appears for ordinary sites when you are signed in; it isn't offered for shortened links, sites where anyone can publish, or addresses that use look-alike letters. When a link's text names a different site from the one it opens, the option is shown but can't be turned on, so that link always asks.

Your trusted sites are your own choice: add only sites you are sure of.

You can see and change your trusted sites in **Settings → AI & Chat → Links**: add a site by typing its name, such as `example.com`, and remove one with the **×** next to it. Your trusted sites belong to your account, so they apply on every device and in every workspace. Trusting a site covers its subdomains: trusting `example.com` also covers `docs.example.com`. It never covers a part of a site where anyone can publish pages (such as `sites.google.com` when you trust `google.com`) or a site's shortened links.

## Before you send

- Choose a [thinking mode](https://support.bluedeer.ai/using-bluedeer/chats/thinking-modes.md) at the bottom of the message box.
- Add files, a voice message or an @ mention. See [How do I add files, voice messages or @ mentions to a message?](https://support.bluedeer.ai/using-bluedeer/chats/add-files-voice-and-mentions.md)
- If you do not want the chat kept in your history, start a [Incognito chat](https://support.bluedeer.ai/using-bluedeer/chats/incognito-chat.md).

## Start a chat inside a project

Click **Project** above your list of chats and choose the project. Then click **New chat** in the bar that shows the project's name. The chat is saved in the project when you send its first message. You can also use **New chat** on the project's page. See [How do I search my chats?](https://support.bluedeer.ai/using-bluedeer/chats/search-chats.md) for more about showing one project's chats.
