# How do I manage my tasks on the phone?

See all your tasks in the Bluedeer app, open one to run it now, pause or resume it, edit it, cancel it, and manage who gets its results and what it may do on its own.

A task is work that Bluedeer runs for you on a schedule. You create one by asking the assistant in a chat (see [How do I schedule a task?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/schedule-a-task.md)). In the app you manage it from the Tasks screen. The rules are the same as on the web, so [How do I run, pause, edit or cancel a task?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/manage-a-task.md) explains what each setting means. This article shows where things are on the phone and what the app says.

## See your tasks

On Home, the **TASKS** section is always there: tap **See all tasks** at its top right to open the Tasks screen, whether a task is coming up, all your tasks are paused, or you have none yet. The section shows the task that runs next under **UP NEXT**; when none is coming up, it says so and how many of your tasks are paused. Members of a shared workspace have the same section. In a shared workspace, **Manage workspace** → **General** → **Catch up** → **All tasks** opens the same screen, and the owner and admins can also tap **Scheduled tasks** on their Home. It lists the tasks in the workspace you have selected, under **Scheduled** with the number of tasks. Each row shows the task's name, its status (**active**, **paused**, **completed**, **failed** or **canceled**), its schedule, its tool-call limit for a run and its next run. If you have no tasks yet, the screen says "No tasks yet." and suggests asking the assistant to schedule something. When there are more tasks than fit on the screen, tap **Show more** at the bottom of the list.

Tap a row to open the task. You can also open a task from its finished run on Home, or from a notice in the Inbox.

## Open a task

A task has two tabs at the top:

- **Overview** shows what the task does, its next run, its settings and its latest run.
- **Results & history** shows what its runs made and a list of every run.

Pull down on either tab to refresh the task.

Under the buttons, **Overview** lists the task's settings. **Next runs**, right under **Schedule**, shows the next three times the task will run. For a task that starts when something happens, **Schedule** reads "When:" followed by what starts it, **Only when** shows its filter, and the next run reads "When it happens". **Task details**, near the bottom, is collapsed: tap it to see when the task was created and last updated, and whether it is private.

## Run, pause, resume and edit

On **Overview**, the buttons sit under **Next run**. Which ones you see depends on the task's status:

- **Run now** starts a run straight away. A message says "A new run was queued for this task."
- **Pause** stops the task from running on its schedule. It shows while the task is active.
- **Resume** starts a paused task again on its saved schedule. It shows while the task is paused.
- **Edit** opens the **Edit task** screen. It shows for active, paused, completed and failed tasks.

A completed task still shows **Run now** and **Edit**. A canceled task shows no buttons. In a shared workspace, only the person who created a task sees these buttons. Anyone else sees the note "Only the person who created this can change it."

### If a task needs permission to resume

Some tasks cannot run on their own until you allow certain actions. When you tap **Resume** and the task needs that, a card called **This task needs permission** opens. It lists the actions the task needs. Any step that cannot be allowed here is listed under **These steps will be skipped and reported**, and the task will skip it and say so in its run.

- Tap **Allow all** to allow the listed actions for this task. If nothing on the card can be allowed, the button reads **Resume anyway**.
- Tap **Cancel** to change nothing. The task stays paused.

When the card can allow something, it also has a switch called **Also don't ask in chats**. Turn it on to set your own rule for these actions to **Don't ask**, as in **Settings**, **AI & Chat**, **Action confirmations**. Leave it off and the task is allowed these actions only for itself. In chats you are still asked.

## Edit a task

Tap **Edit** to open the **Edit task** screen. Tap **Save** at the top right to keep your changes, or **Cancel** to leave without saving. **Save** stays off until you change something.

The fields are the same as on the web. On the phone:

- **Name** and **Instructions** are text boxes.
- **Schedule** has four choices, **Once**, **Cron**, **Interval** and **When something happens**.
  - **Once** has **Runs on** and **Time zone**. Tap **Runs on** to pick the day on a calendar and set the hour and minute with the **−** and **+** buttons (minutes move in steps of 5), then tap **Done**. The time is read in the task's time zone, which the row names, for example "Riyadh time".
  - **Cron** has a **Cron expression** box and **Time zone**. If you are not sure what to type in the expression, ask the assistant in a chat to change the schedule for you.
  - **Interval** has **Every seconds** and **Starting from**. An interval must be at least 300 seconds, which is 5 minutes. **Starting from** opens the same calendar, read in your phone's time zone.
  - **When something happens** starts the task from an event instead of a clock. Under **Starts when**, choose what starts it. A choice the workspace can't use yet is grayed out with the reason, such as "Connect this app in this workspace first." **Only when** narrows which events start the task. **Group events over (seconds, optional)** joins events that arrive close together into one run. Left empty, the screen says "Each event starts its own run." When a web request to the task's own address starts the task, a **Webhook address** section appears under it, with the address, its checks and its last deliveries. See [Start a task when something happens](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/start-a-task-when-something-happens.md) and [Start a task from a webhook](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/start-a-task-from-a-webhook.md).
  - Tap **Time zone** to choose from a list. Your phone's time zone is first, then the one the task uses now. Type a city or region in the search box, for example "New York", to find a zone. If you change the time zone, the time you picked stays the same on the clock: 9:00 stays 9:00 in the new zone.
- **When to run** shows on tasks whose runs fall at busy hours. Tap **At the scheduled time**, or one of the **When usage is cheaper** choices with the latest time a run may wait. The task's screen then says when the next run is planned. See [How do I let a task run when usage is cheaper?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/run-a-task-when-usage-is-cheaper.md).
- **Completion notifications** are **Always**, **On change** or **Never**.
- **Notify on failure** is a switch.
- **Results also go to** appears for tasks in a shared workspace. It has one switch for each teammate. See [Results also go to](#results-also-go-to) below.
- **Tool calls per run (optional)** can be left empty. The task then uses the safety limit on tool calls in one run, which is the same on every plan, and the screen shows the limit that applies now. A number you enter can only be lower.

If a change lets the task do something it could not do before, the **This task needs permission** card appears before anything is saved. Tap **Allow all** to save with those permissions, or **Save anyway** if nothing on the card can be allowed. Tap **Cancel** to keep the old settings. If the change also shares results with teammates, the button reads **Allow all and share** or **Share and save** instead.

If a [workspace rule](https://support.bluedeer.ai/team-and-enterprise/security-and-compliance/workspace-rules.md) sends changes to this task to an approver, **Save** doesn't save yet. An alert says "Waiting for" the approver and the rule, and "Nothing is saved until they do; you'll hear in your Inbox."

## Results also go to

In a shared workspace, the **Results also go to** section on **Overview** lists the teammates who receive the task's results. Each one shows one of two states:

- **Can open results**: you have approved them.
- **Not approved: gets nothing**: until you approve, runs send them nothing.

Tap **Approve sharing** to approve them. Approval gives the teammate access to the task and to the artifacts its runs make, so you only need to do it once for each person. In the **Edit task** screen, the switch for each teammate does the same. You can send results to a limited number of people. A teammate who has left the workspace stays listed as **A former member** until you take them off, and gets nothing in the meantime.

## Cancel a task

Canceling stops a task permanently. You can cancel a task that is active or paused. Its runs and results stay in its history afterwards.

- On **Overview**, tap the red **Cancel task** button at the bottom of the page.
- On the Tasks screen, tap the close icon on the right of an active or paused task's row.

Both ask the same question as the web, titled **Cancel “task name”?**: "The task stops running and can’t be resumed. Its results and history stay available." Tap **Cancel task** to confirm, or **Keep task** to keep it.

## Allowed to run on its own

**Allowed to run on its own** lists the actions the task may take without asking, such as sending an email, with the day each one was allowed. To revoke one, tap **Remove** next to it, then **Remove** in the alert. From its next run the task skips that action and asks for permission in your Inbox instead. The section says "Nothing yet." when the task has no such actions.

## Results & history

**Results & history** has two parts.

- **Task outputs** shows what completed runs made, under **What changed** and **Artifacts**. Tap an artifact to open it in the app, on its own page, with **Share** and **Download**. Tap **Newer** or **Older** to move between runs. **Run details** shows when a run was scheduled and, if it made any, its **Structured outputs**.
- **Run history** lists every run with its status: **Queued**, **Running**, **Succeeded**, **Failed**, **Canceled**, **Limit reached**, **Waiting for approval** (a step is still waiting for an answer: one a workspace rule sent to an approver, or one that would reach someone outside the organization and waits for you, the task's owner, in your Inbox), **Declined by reviewer** (the approver rejected a step, so nothing was done for it) or **Approval expired** (nobody approved a step within 24 hours, so nothing was done for it). A run shows **Succeeded** only when every step sent to an approver was approved and done; when several such steps ended differently, the run shows one status and lists each step. A run that an event started has a line under its date that begins "Started because of" and names the event, with "and 2 more events" when several were grouped into it. Tap a run to see its start and finish times, how many tool calls it used out of its limit, its time limit and its summary. A step the run was not allowed to take on its own shows as "Skipped:" with the reason, for example "Skipped: Send email. It asks before it runs." A step a [workspace rule](https://support.bluedeer.ai/team-and-enterprise/security-and-compliance/workspace-rules.md) sent to an approver shows as "Waiting for" the approver, with **Details**, and once it's answered, who approved or declined it and how it went. If the approver gave a reason for declining, it's shown under the step, quoted as they wrote it. Tap **Newer** or **Older** to page through the runs.

[What is in a task's results and run history?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/task-results-and-run-history.md) explains what each status and figure means.

If consecutive runs fail, the **Overview** tab shows how many have failed in a row. [Why did my task stop after it failed?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/why-a-task-stopped-after-failing.md) explains what that count means. The notices you get for failures and finished runs are explained in [Notifications on the phone](https://support.bluedeer.ai/mobile/using-the-app/notifications-on-the-phone.md) and [Where do task results and notices appear?](https://support.bluedeer.ai/using-bluedeer/tasks-and-inbox/task-results-and-inbox.md).

## If something goes wrong

If the task cannot be loaded, the screen says "Couldn't load task" and offers **Retry** and **Back**. If an action fails, such as pausing or running the task, an alert gives the reason. Check your connection and try again. If you have no seat in the workspace you are in, the screen shows a banner in place of the buttons. See [What does the app show when I have no seat in a workspace?](https://support.bluedeer.ai/mobile/using-the-app/no-seat-on-the-phone.md)
